Skip navigation

Wireless-Induction Charging for EVs Matter of When, Not If

WIRELESS-INDUCTION CHARGING OF electric vehicles and plug-in hybrids is certain to become standard, one of America's top researchers in power electronics says. We believe it's not a matter of if but when wireless charging will be in all (electric) vehicles, Laura Marino of the Oak Ridge National Laboratory tells several hundred engineers attending the recent Automotive Power Electronics conference

WIRELESS-INDUCTION CHARGING OF electric vehicles and plug-in hybrids is certain to become standard, one of America's top researchers in power electronics says.

“We believe it's not a matter of if but when wireless charging will be in all (electric) vehicles,” Laura Marino of the Oak Ridge National Laboratory tells several hundred engineers attending the recent Automotive Power Electronics conference in Paris sponsored by the French automotive engineering society SIA.

Marino, deputy director for the Power Electronics and Electrical Power Systems Research Center, says Oak Ridge, working with OEMs and suppliers, has developed and tested technology that will pass 5kW of recharge across 10 ins. (25.4 cm) of air with more than 90% efficiency.

Inductive charging will win out because of convenience, says Marino. “Think of a mother of three children coming back from shopping with her arms full. It would not be surprising if she forgets to plug in her car.”

Inductive charging sends electricity wirelessly between two coils. One coil is in the car, the other in the infrastructure. It could be hidden in the floor of a garage or part of a mat rolled out over concrete.

Ford and Chrysler both are working on inductive charging, she says, and researchers at Oak Ridge will retrofit some Nissan Leaf EVs to work with inductive charging to learn more.

Meanwhile, Oak Ridge is working on ideas to reduce costs. “Two years ago, a project was presented using the internal windings of the motor as well as the switches in the inverter to accomplish the charging function,” Marino says.

“We were asked by OEMs if we could do this with a power-split architecture like Toyota uses. We built it up where we now have two motors and two inverters, so we can charge the battery through them. This year, we are elaborating on this project.”

In the future, charging points could be built into roads at stop signs, she says.

Near term, a company that runs shuttle buses from Logan Airport in Boston to car-rental agencies will put the idea into action by embedding inductive chargers at the spaces where a bus waits for passengers, so it can recharge while waiting.

In Europe, where the industry has not yet agreed on a standard for plugs, Renault is investigating inductive charging for its next-generation electric vehicles.

Development of the EV industry “also relies on the cost of infrastructure,” says Patrick Bastard, director-advanced electronics and technologies at Renault. “We are working on new concepts.”

For Europe's fast-charge standard, Renault is arguing for a system based on alternating current, which could lower the cost of building charging points. Some estimates find a direct-current fast-charge point would cost E50,000 ($70,000).

By having the electronics that convert alternating current into direct current for the battery located in the car, instead of the infrastructure, the infrastructure would be less-expensive.

The next-generation Renault EVs, already being planned for 2015-2020, could include inductive-charging capability, as well as whatever standard plug-and-socket Europe decides to adopt.

“For the third generation, we will introduce breakthroughs to get big cost reductions and offer the customer a big increase in efficiency,” Bastard says. “Induction would be a performance increase that we could offer. It could be a good, easy way of charging your car.”

The AC/DC battle over charging standards in Europe is a bit ironic, because alliance partners Renault and Nissan are on different sides of the debate.

Nissan already has chosen the direct-current, fast-charge standard agreed upon by the Japanese electric and auto industries.

But AC/DC is not the only problem for a European standard. For conductive charging, there continues to be a debate over the shape of the socket.


<a href="http://WARDSAUTO.COM" target="_blank">WARDSAUTO.COM</a>

French Engineering Society Explores Challenges
wardsauto.com/ar/french_challenges_evs_101203

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish